ICP DAS WISE User Manual
http://wise.icpdas.com
100
Figure 6-53
：
iCAM IP Camera OSD Message Setting page
Input a name in the “Nickname” field and you could also input the
description of this OSD message in the “Description” field.
Enter the content of the OSD message in the “Content” field. WISE
provides the “Real-time variable editor” for users to add current I/O
channel values or Internal Register values into the content of the
message.
In the “Color” field, select the color of the OSD message. There are
six options: white, black, red, green, blue and yellow.
In the “Duration Setting” section, set the duration of the OSD
message in the “Time” field. The range is from 0 to 65535 seconds.
In “Timeout Action” field, users can set “Clear the content” to clear
the OSD message when the length of the display time of the current
message is exceeded the setting of "Duration"; or set “Change the
content” to change the content and the color of the OSD message
with the settings below. The changed OSD message would be
displayed until next OSD message is triggered to display.
After all settings are completed, click “OK” button to save the
setting of OSD message, and return to the IP Camera setting page.
Please Note: The OSD message only can be entered in one line, and be
displayed at the left-top corner of the camera stream. Following is
example for reference.
