ICP DAS WISE User Manual
http://wise.icpdas.com
241
Figure 10-57
：
CGI Command Send action setting page
Follow the steps below:
i
Select a pre-set CGI Command from the dropdown list of the
“Server” and “Command” field of the CGI Command section.
The CGI Command information will be displayed for you to
verify if this is the CGI Command you are going to send to.
ii
Click “OK” button to confirm the settings and return to the Rule
settings page.
10.2.10.2 Reset Variable
You can reset the saved content of the CGI Command variable when
executing a THEN/ELSE Action statement; the editing page is shown
as below:
Figure 10-58
：
CGI Command Reset Variable action setting page
Follow the steps below:
i
Specify the CGI Command variable and CGI Command source
from the dropdown list of “Variable Name” field and “Source
Address” field. When this action is executed, WISE would reset
the content of the variable, and the evaluation result of the IF
statement which is associated with the variable will be verified
again.
ii
Click “OK” button to confirm the settings and return to the Rule
settings page.
