ICP DAS USA WISE-75 M Series, User Manual

Page: 230 / 314

ICP DAS WISE User Manual
http://wise.icpdas.com
230
the THEN/ELSE Action statement; the editing page for Holding
Register Action is shown as follow:
Figure 10-39
：
Holding Register action setting page
Follow the steps below:
i
Select the module and the address of the Holding Register
from the dropdown list of the “Module & Address” section.
ii
Specify the Operator in the “Operator” field. The 3 operators
are as follow
：
 “=”
：
Indicate assign the new Holding Register value as
the value in “Value” field.
 “+=”
：
Indicate assign the new Holding Register value
as the original Holding Register value plus the value in
“Value” field.
 “-=”
：
Indicate assign the new Holding Register value as
the original Holding Register value minus the value in
“Value” field.
iii
Set up the value in the “Value” field, WISE provides 12 value
options. Please refer to “
10.2.1.3 AO
” section for more detail.
iv
Specify the “Execution Frequency” to be “One Time” or
“Repeat”. Please refer to “
10.2 THEN/ELSE Action Setting
”
for detail.
v
Click “OK” button to confirm the settings and return to the
Rule settings page.
10.2.3 IP Camera
Click on IP Camera, 3 options will appear as the following: Snapshot,
Video and OSD Message.