ICP DAS WISE User Manual
http://wise.icpdas.com
158
will be added to the list and the settings of the old Timer will be copied
to this newly added Timer.
x
To remove a pre-set Timer, please click the radio button in front of the
pre-set Timer and then click “Remove”.
xi
After all Timer settings are completed, click “Save” button to save the
changes.
9.3 Schedule Setting
WISE provides Schedules to setup prescheduled routine tasks. The setting
of Schedule can be used to check if the system time of the WISE is in the
range of date/time setting of the schedule or not. The checking status can be
included in the IF Condition statements. Schedule setting page is shown as
below:
Figure 9-7
：
Schedule List Page
The settings steps are as below:
i
Click on “Add new schedule” to add a new schedule.
ii
After clicking the “Add new schedule”, a setting page will appear.
Input a name in the “Nickname” field and you could also input the
description of this schedule in the “Description” field.
iii
Select Mode to be “Calendar” or “Repeat”.
Calendar
：
(a.)
In the “Date” field, select the “Starting Month” and “Duration”
from the dropdown list. The maximum duration can be set is
120 months
. After you specify the Year and Month in the Date
section, the calendars corresponding to the Year and Month you
specified will appear as shown below:
