2104 Model DU3 Expandable Storage Plus
Dimensions
Height
128 mm
5 in.
(3 EIA units)
Width
447 mm
17.6 in.
Depth
563 mm
22.2 in.
Weight
¹
Minimum
22 kg
49 lbs.
Maximum
36 kg
80 lbs.
Electrical
(For each drawer)
Power source loading
N/A
Voltage range (V ac)
100 to 240
Frequency (hertz)
50 to 60
Thermal output (Maximum)
1126 Btu/hr
Power Requirements (Maximum)
330 watts
Power factor
not less than 0.95 at 50% maximum load
Inrush current
40 amps
Maximum altitude
2133 m (7000 ft.)
Temperature Requirements
²
Operating
10 to 40°C
(50 to 104°F)
Non-Operating
10 to 52°C
(50 to 125°F)
Humidity Requirements
Operating
Non-Operating
(Noncondensing)
8% to 80%
8% to 80%
Wet Bulb
27°C (80°F)
27°C (80°F)
Noise Emissions
¹
Operating
Idle
L
WAd
6.5 bels
6.1 bels
L
pAm
N/A
N/A
<L
pA
>
m
N/A
N/A
Impulsive or prominent discrete tones
N/A
N/A
Clearances
Front
Back
Left
Right
Install/Air Flow
²
1140 mm(45 in)
810 mm (32 in)
N/A
N/A
Service
1140 mm(45 in)
810 mm (32 in)
When mounted in
a rack
1. See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
2. The recommended operating temperature is 22°C (72°F) or lower. At lower temperatures, the risk of failure in the
unit is reduced. If the operating temperature is above 22°C (72°F) for long periods of time, the unit will be
exposed to a greater risk of failure from external causes.
Chapter 5. Physical Characteristics of the 2100 Series
235
Summary of Contents for 7012 397
