IBM 315 User Handbook Manual Download Page 89

Page: 89 / 245

Installing Video Memory-Module Kits

To install the video-memory modules on the video adapter:

1. Locate the video-memory module connectors (sockets) on the

video adapter.

Note: You might need to remove the video adapter to gain

access to the connectors. For information about removing
adapters, see “Removing Adapters” on page 61.

Two Video Memory
Upgrade Sockets

2. Install the video-memory modules:

a. Touch the static-protective package containing the video

memory-module kit to any unpainted metal surface on the
server; then, remove the video memory-module kit from the
package.

Static

Devic

Static

Devic

PC Server 315 User's Handbook

Summary of Contents for 315






















































































































































































































































Search results

Summary of Contents for 315

Reviews:

Related manuals for 315

Brands by name

Popular brands

IBM 315, User Handbook Manual

Search results

Summary of Contents for 315

Reviews:

Related manuals for 315

Brands by name

Popular brands