IBM 315 User Handbook Manual Download Page 104

Page: 104 / 245

Working with Internal Drives

6. Connect the SCSI signal cable and power cable to the installed

drive.

7. Reinstall the drive assembly, using the screws that you removed

in step 1 on page 87. Be sure to reconnect the fan's power
connector if removed in step 2 on page 87.

8. Go to the device-record form in Appendix C, “Server Records”

on page 203, and update the drive information.

What to do next?

To install or remove:

– A microprocessor upgrade, go to “Installing

Microprocessor Upgrades” on page 95

– A security option, go to “Security Options” on page 105

To complete the installation, go to “Completing the
Installation” on page 113.

Chapter 3. Installing Options

Summary of Contents for 315






















































































































































































































































Search results

Summary of Contents for 315

Reviews:

Related manuals for 315

Brands by name

Popular brands

IBM 315, User Handbook Manual

Search results

Summary of Contents for 315

Reviews:

Related manuals for 315

Brands by name

Popular brands