Working with Memory-Module Kits
2. Note the slot position of any installed adapters; then, remove
any adapters that block access to the DIMM connectors. (In
most cases, it is not necessary to remove half-length adapters.
For information about removing an adapter, see “Removing
Adapters” on page 61.)
What to do next?
To install a DIMM kit, go to step 3.
To remove a DIMM kit, go to step 5 on page 71.
3. Use the following procedure to install a DIMM kit:
a. Touch the static-protective package containing the DIMM kit
to any unpainted metal surface on the server; then, remove
the memory-module kit from the package.
Stat
ic
Devices
b. Position the DIMM kit so that the two notches (key slots) on
the bottom edge align with the two notches in the connector
on the system board.
70
PC Server 315 User's Handbook
