Using the Configuration/Setup Utility Program
To set an administrator password:
1. Select Administrator Password on the System Security menu;
then, press Enter.
2. Type the password in the Enter Administrator Password data
field.
A password can contain any combination of up to seven
alphanumeric characters (A–Z, a–z, and 0–9). Keep a record of
your password in a secure place.
3. Move the cursor to the Enter Administrator Password Again
data field and type the password again.
4. Select Set or Change Administrator Password to save the new
password; then, press Enter. The password becomes effective
immediately.
Note: A message appears if the two passwords do not match.
If this happens, press Esc to cancel the request and return
to the System Security menu.
To delete an administrator password:
1. Select Administrator Password on the System Security menu;
then, press Enter.
2. Select Delete Administrator Password; then, press Enter.
3. A confirmation window appears. Press Enter to delete the
administrator password. Press Esc to return to the System
Security menu.
Chapter 2. Configuring Your Server
25
