IBM 315 User Handbook Manual Download Page 101

Page: 101 / 245

Working with Internal Drives

12. Connect the SCSI signal cable and power cable to the installed

drive.

Notes:

a. Cables connectors are keyed and connect only one way.

b. When connecting cables to the drive in bay 3, connect the

SCSI signal cable first; then, connect the power cable.

13. Store the drive tray in a safe place.

14. Go to the device-record form in Appendix C, “Server Records”

on page 203, and update the drive information.

What to do next?

To install or remove:

– A microprocessor upgrade, go to “Installing

Microprocessor Upgrades” on page 95

– A security option, go to “Security Options” on page 105

To complete the installation, go to “Completing the
Installation” on page 113.

PC Server 315 User's Handbook

Summary of Contents for 315






















































































































































































































































Search results

Summary of Contents for 315

Reviews:

Related manuals for 315

Brands by name

Popular brands

IBM 315, User Handbook Manual

Search results

Summary of Contents for 315

Reviews:

Related manuals for 315

Brands by name

Popular brands