Installing Microprocessor Upgrades
3. Locate the configuration switch and the microprocessor socket
on the system-board illustration in “Locating System-Board
Components” on page 51.
4. When installing a microprocessor upgrade, you must change the
microprocessor/bus speed switch to the correct settings.
Note: The wrong setting will result in unreliable server
operation. In addition, an incorrect value will appear in
the Configuration/Setup utility program.
Use the following illustration to set switches (1 to 6) on the
configuration switch.
180 MHz
200 MHz
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
ON
ON
OFF
OFF
Chapter 3. Installing Options
97
