IACDRIVE I5300 Series, User Manual, Page: 99 / 272

I5300 User Manual Function Code Table
- 99 -
F unction
Code
Parameter Name Setting Range Default Property
P 8-05 Acceleration time 3 0.0–6500.0s
Model
dependent
☆
P 8-06 Deceleration time 3 0.0–6500.0s
Model
dependent
☆
P 8-07 Acceleration time 4 0.0–500.0s
Model
dependent
☆
P 8-08 Deceleration time 4 0.0–6500.0s
Model
dependent
☆
P 8-09 Jump frequency 1 0.00 Hz to maximum frequency 0.00 Hz
☆
P 8-10 Jump frequency 2 0.00 Hz to maximum frequency 0.00 Hz
☆
P 8-11 F requency jump amplitude 0.00 Hz to maximum frequency 0.00 Hz
☆
P 8-12
F orward/Reverse rotation
dead-zone time
0.0–3000.0s 0.0s
☆
P 8-13 Reverse control
0: Enabled
1: Disabled
0
☆
P 8-14
Running mode when set
frequency lower than
frequency lower limit
0: Run at frequency lower limit
1: Stop
2: Run at zero speed
0
☆
P 8-15 Droop control 0.00–10.00 Hz 0.00 Hz
☆
P 8-16 Accumulative power-on time
threshold
0–65000 h 0 h
☆
P 8-17 Accumulative running time
threshold
0–65000 h 0 h
☆
P 8-18 Startup protection
0: No
1: Yes
0
☆
P 8-19
F requency detection value
( F DT1)
0.00 Hz to maximum frequency 50.00 Hz
☆
P 8-20
F requency detection
hysteresis ( F DT hysteresis 1)
0.0%–100.0% (FDT1 level)
5.0%
☆
P 8-21 Detection range of frequency
reached
0.00–100% (maximum frequency) 0.0%
☆
P 8-22 Jump frequency during
acceleration/deceleration
0: Disabled1: Enabled 0
☆
P 8-25
F requency switchover point
between acceleration time 1
and acceleration time 2
0.00 Hz to maximum frequency 0.00 Hz
☆
P 8-26
F requency switchover point
between deceleration time 1
and deceleration time 2
0.00 to maximum frequency 0.00 Hz
☆
P 8-27 Terminal JOG preferred 0: Disabled1: Enabled 0
☆