IACDRIVE I5300 Series, User Manual, Page: 93 / 272

I5300 User Manual Function Code Table
- 93 -
F unction
Code
Parameter Name Setting Range Default Property
P 5-03 Extension card relay function
(P/A-P/ B -P/C)
14: Torque limited
15: Ready for RUN
16: AI1 larger than AI2
17: Frequency upper limit reached
18: Frequency lower limit reached
(no output at stop)
19: Undervoltage state output
20: Communication setting
21: Reserved
22: Reserved
23: Zero-speed running 2 (having
output at stop)
24: Accumulative power-on time
reached
25: Frequency level detection
FDT2 output
26: Frequency 1 reached
27: Frequency 2 reached
28: Current 1 reached
29: Current 2 reached
30: Timing reached
31: AI1 input limit exceeded
32: Load becoming 0
33: Reverse running
34: Zero current state
35: Module temperature reached
36: Software current limit
exceeded
37: Frequency lower limit reached
(having output at stop)
38: Alarm output
39: Motor overheat warning
40: Current running time reached
41: Fault output (There is no
output if it is the coast to stop
fault and undervoltage occurs.)
0
☆
P 5-04 O1 function selection (open-
collector output terminal)
P 5-04
DO1 function selection
(open-collector output
terminal)
1
☆
P 5-05 Extension card DO2 function 4
☆