IACDRIVE I5300 Series, User Manual, Page: 95 / 272

I5300 User Manual Function Code Table
- 95 -
F unction
Code
Parameter Name Setting Range Default Property
P 5-22 DO valid mode selection
Unit's digit (FMR valid mode)
00000
☆
0: Positive logic
1: Negative logic
Ten's digit (Relay 1 valid mode)
0, 1 (same as FMR)
Hundred's digit (Relay 2 valid
mode)
0, 1 (same as FMR)
Thousand's digit (DO1 valid
mode)
0, 1 (same as FMR)
Ten thousand's digit (DO2 valid
mode)
0, 1 (same as FMR)
P 5-23 AO1 output signal selection
0: Voltage signal
1: Current signal
0
★
Group F 6: Start/Stop Control
P 6-00 Start mode
0: Direct start
1: Rotational speed tracking
restart
2: Pre-excited start (asynchronous
motor)
0
☆
P 6-01 Rotational speed tracking
mode
0: From frequency at stop
1: From zero speed
2: From maximum frequency
0
★
P 6-02 Rotational speed tracking
speed
1–100 20
☆
P 6-03 Startup frequency 0.00–10.00 Hz 0.00 Hz
☆
P 6-04 Startup frequency holding
time
0.0–100.0s 0.0s
★
P 6-05 Startup DC braking current/
Pre-excited current
0%–100% 0%
★
P 6-06 Startup DC braking time/
Pre-excited time
0.0–100.0s 0.0s
★
P 6-07 Acceleration/Deceleration
mode
0: Linear acceleration/
deceleration
1: S-curve acceleration/
deceleration A
2: S-curve acceleration/
deceleration B
0
★