IACDRIVE I5300 Series, User Manual, Page: 30 / 272

Mechanical and Electrical Installation I5300 User Manual
- 30 -
Chapter 3 Mechanical and Electrical Installation
3.1 Mechanical Installation
3.1.1 Installation Environment Requirements
Item Requirements
Ambient temperature -10°C to +50°C
Heat dissipation
Install the AC drive on the surface of an incombustible object, and
ensure that there is suf fi cient space around for heat dissipation.
Install the AC drive vertically on the support using screws.
Mounting location
F ree from direct sunlight, high humidity and condensation
F ree from corrosive, explosive and combustible gas
F ree from oil dirt, dust and metal powder
Vibration
Less than 0.6 g
F ar away from the punching machine or the like
Protective enclosure
The I5300 series AC drives of plastic housing are the whole unit
built-in products operated through remote control and need to be
installed in the fi nal system.The fi nal system must have the required
fi reproof cover, electrical protective cover and mechanical protective
cover, and satisfy the regional laws & regulations and related IEC
requirements.
3.1.2 Installation Clearance Requirements
The clearance that needs to be reserved varies with the power class of the I5300, as
shown in the following figure.
Figure 3-1 Clearance around the I5300 for installation
The AC drive shall be installed vertically upward .
B
B
A A
Hot air
Cold air
0.7
−
15 kW A ≥ 10 mm B ≥ 100 mm
18.5 − 22 kW A ≥ 10 mm B ≥ 200 mm
22
−
37 kW A ≥ 50 mm B ≥ 200 mm
37
−
90 kW A ≥ 50 mm B ≥ 300 mm
Installation clearance requirements on
the I5300 series AC drives of different
power classes
Power Class Clearance Requirements