IACDRIVE I5300 Series, User Manual, Page: 67 / 272

I5300 User Manual Operation, Display and Application Example
- 67 -
Figure 4-27 Function code setting for fixed length control
P 4-04 = 27
(Length pulses
input)
DI5
P 4-00 to P 4-09
= 28
(Length reset)
PB -07
(Number of
pulses per
meter)
Length pulses
Length reset
PB -06
(Actual length)
PB -05
(Set length)
≥
P 5-00 to P 5-05 = 10
(Length reached)
Reset Clear to 0
÷
After the length is
reached, the DO
becomes 1.
Length reset input
Length reached output
Length pulses input
1 2 3 10 11 12
1 2
PB -06 = 0
PB -06 = 11
PB -05 = 11
U0-13 (Length value)
U0-13 = 0
Note
• In the fi xed length control mode, the direction cannot be identi fi ed and only the length shall be
calculated based on the number of pulses.
• Only DI5 can be allocated with the function "Length count input".
• An automatic stop system can be implemented if the length reached signal output by the DO is
fed back to the AC drive input terminal with the stop function.
Figure 4-28 Common application example of the fixed length control function
M
DI4
DI3
DI2
COM
P 4-03 = 26
，
P 4-04 = 27
PB -07 (Number of
pulses per meter)
RUN button
JOG button
Length pulses input
CME
DI1
Stop button
DO1
Button for
clearing length
DI5
Length reached
output
Length
detection
sensor
Winding
motor
P 0-02 = 1
，
P 4-00 = 1
P 4-01 = 3
，
P 4-02 = 4
P 4-11 = 2
P 5-04 = 10
PB -05 (Set length)