IACDRIVE I5300 Series, User Manual, Page: 22 / 272

Product Information I5300 User Manual
- 22 -
Item
Specifications
Individualized
functions
Multi-motor
switchover
Four motors can be switched over via four groups of motor
parameters.
Multiple
communication
protocols
It supports communication via Modbus-RTU, PROFIBUS-
DP, CANlink and CANopen.
Motor overheat
protection
The optional I/O extension card enables AI3 to receive the
motor temperature sensor input (PT100, PT1000) so as to
realize motor overheat protection.
Multiple encoder
types
It supports various encoders such as differential encoder,
open-collector encoder, resolver, UVW encoder, and SIN/
COS encoder.
User
programmable
function
The optional programming card helps you to realize
secondary development. Its programming environment is
compatible with that of the PLC of Inovance.
Advanced
background
software
It supports the operation of AC drive parameters and virtual
oscillograph function, via which the state inside the AC drive
is monitored.
RUN
Running
command source
• Operation panel
• Control terminals
• Serial communication port
You can perform switchover between these sources in
various ways.
F requency source
There are a total of 10 frequency sources, such as digital
setting, analog voltage setting, analog current setting, pulse
setting and serial communication port setting.
You can perform switchover between these sources in
various ways.
Auxiliary
frequency source
There are ten auxiliary frequency sources. It can implement
fine tuning of auxiliary frequency and frequency synthesis.
Input terminal
Standard:
5 digital input (DI) terminals, one of which supports up to
100 kHz high-speed pulse input
2 analog input (AI) terminals, one of which only supports
0–10 V voltage input and the other supports 0–10 V voltage
input or 4–20 mA current input
Expanding capacity:
5 DI terminals
1 AI terminal that supports -10–10 V voltage input and also
supports PT100\PT1000