manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual

The Hyundai Elantra 2018 is an exceptional vehicle designed to provide optimum performance and comfort. To help you get started with this remarkable car, we offer a comprehensive user manual available for free download on our website. Discover every detail, feature, and function of the Elantra 2018 with our user-friendly manual, exclusively at manualshive.com.

Share
Download
background image

7-18

Maintenance

Automatic Transmission  Fluid
(if equipped)

Automatic transmission fluid should not
be checked under normal usage condi-
tions. But in severe conditions, the fluid
should be changed at an authorized
HYUNDAI dealer in accordance to the
scheduled maintenance at the beginning
of this chapter.

Automatic transmission fluid color is
basically red.
As the vehicle is driven, the automatic
transmission fluid will begin to look
darker. This is a normal condition and
you should not judge the need to
replace the fluid based upon the
changed color.

Dual Clutch Transmission
Fluid (if equipped)

Inspect the dual clutch transmission fluid
according to the maintenance schedule.

Manual Transmission  Fluid 
(if equipped)

Inspect the manual transmission fluid
according to the maintenance schedule.

Brake Hoses and Lines

Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.

Brake/Clutch Fluid 

Check brake/clutch fluid level in the
brake/clutch fluid reservoir. The level
should be between the MIN and the MAX
marks on the side of the reservoir. Use
only hydraulic brake/clutch fluid conform-
ing to DOT 3 or DOT 4 specification.

Parking Brake

Inspect the parking brake system includ-
ing the parking brake pedal and cables.

Brake Discs, Pads, Calipers
and Rotors

Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.

Exhaust Pipe and Muffler 

Visually inspect the exhaust pipes, muf-
fler and hangers for cracks, deterioration,
or damage. Start the engine and listen
carefully for any exhaust gas leakage.
Tighten connections or replace parts as
necessary.

Suspension Mounting Bolts 

Check the suspension connections for
looseness or damage. Retighten to the
specified torque.

Steering Gear Box, Linkage &
Boots/Lower Arm Ball Joint

With the vehicle stopped and the engine
off, check for excessive free-play in the
steering wheel. Check the linkage for
bends or damage. Check the dust boots
and ball joints for deterioration, cracks, or
damage.
Replace any damaged parts.

Drive Shafts and Boots

Check the drive shafts, boots and clamps
for cracks, deterioration, or damage.
Replace any damaged parts and, if nec-
essary, repack the grease.

Air Conditioning Refrigerant 

Check the air conditioning lines and con-
nections for leakage and damage.

NOTICE

The use of a non-specified fluid
could result in transmission mal-
function and failure. Use only the
specified automatic transmission
fluid (refer to "Recommended
Lubricants and Capacities" in
chapter 8).

CAUTION

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Elantra 2018

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
Axxess AXGMLN-08 Installation Instructions Manual preview
AXGMLN-08
Brand: Axxess Pages: 8
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
Fab Fours F2950 Installation Instructions Manual preview
F2950
Brand: Fab Fours Pages: 21
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Brand: Dodge Pages: 484
Volvo XC40 RECHARGE Retailer Pairing Manual preview
XC40 RECHARGE
Brand: Volvo Pages: 5
Fortin EVO ONE THAR-GM7 Installation Instructions Manual preview
EVO ONE THAR-GM7
Brand: Fortin Pages: 11
Waeco PerfectView CRT300 Installation And Operating Manual preview
PerfectView CRT300
Brand: Waeco Pages: 200
Mazda MVG 4507 F Installation Instruction preview
MVG 4507 F
Brand: Mazda Pages: 38
Parkmate RVM-043DVR User Manual preview
RVM-043DVR
Brand: Parkmate Pages: 16
Honda 2014 Accord Coupe EX Technology Reference Manual preview
2014 Accord Coupe EX
Brand: Honda Pages: 18
Myenergi eddi 16A1P01H Installation Manual preview
eddi 16A1P01H
Brand: Myenergi Pages: 36
Nokia CK-600 Product Sheet preview
CK-600
Brand: Nokia Pages: 2
Nokia CR-200 User Manual preview
CR-200
Brand: Nokia Pages: 12

Brands by name

Popular brands

Load more brands