manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 364 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 364

5-81

Dri
ving y

our v

ehicle

5

SCC Front Radar Sensor

The Smart Cruise Control uses a radar to
detect distance to the vehicle ahead.

Warning message

Check SCC radar

When the sensor lens cover is blocked
with dirt, snow, or debris, the Smart
Cruise Control System operation may
stop temporarily. If this occurs, a warning
message will appear on the LCD display.
Remove any dirt, snow, or debris and
clean the radar sensor lens cover before
operating the Smart Cruise Control
System.
The Smart Cruise Control system may
not properly activate, if the radar is total-
ly contaminated, or if any substance is
not detected after turning ON the engine
(e.g. in an open terrain).

OLF054203N

If the vehicle ahead (vehicle speed:
less than 20 mph (30 km/h)) disap-
pears to the next lane, the warning
chime will sound and a message
will appear. Adjust your vehicle
speed for vehicles or objects that
can suddenly appear in front of you
by depressing the brake pedal.
Always pay attention to the road
condition ahead.

CAUTION

OAD055017

OLF054444N

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments