manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 82 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 82

3-5

Con

v

enient f

eatur

es of y

our v

ehicle

3

Remote key precautions

The remote key will not work if any of the
following occur:
• The key is in the ignition switch.
• You exceed the operating distance limit

(about 90 feet [30 m]).

• The remote key battery is weak.
• Other vehicles or objects may be

blocking the signal.

• The weather is extremely cold.
• The remote key is close to a radio

transmitter such as a radio station or
an airport which can interfere with nor-
mal operation of the remote key.

When the remote key does not work cor-
rectly, open and close the door with the
mechanical key. If you have a problem
with the remote key contact an author-
ized HYUNDAI dealer.
If the remote key is in close proximity to
your mobile phone, the signal could be
blocked by your mobile phones normal
operational signals. This is especially
important when the phone is active such
as making and receiving calls, text mes-
saging, and/or sending/receiving emails.
Avoid placing the remote key and your
mobile phone in the same pants or jack-
et pocket and always try to maintain an
adequate distance between the two
devices.

Information

This device complies with Part 15 of the
FCC rules.
Operation is subject to the following three
conditions:
1. This device may not cause harmful

interference, and

2. This device must accept any interfer-

ence received, including interference
that may cause undesired operation.

3. Changes or modifications not expressly

approved by the party responsible for
compliance could void the user’s
authority to operate the device.

Keep the remote key away from elec-
tromagnetic materials that blocks
electromagnetic waves to the key sur-
face.

Battery replacement 

If the remote key is not working properly,
try replacing the battery with a new one.
Battery Type: CR2032

To replace the battery:
1. Pry open the rear cover of the remote

key.

2. Remove the old battery and insert the

new battery. Make sure the battery
position is correct.

3. Reinstall the rear cover of the remote

key.

NOTICE

i

OLMB043011

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments