manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 187 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 187

3-110

Convenient features of your vehicle

D

DE

EF

FR

RO

OS

ST

TE

ER

R

To prevent damage to the conductors
bonded to the inside surface of the
rear window, never use sharp instru-
ments or window cleaners containing
abrasives to clean the window.

If you want to defrost and defog the
front windshield,

refer to the

"Windshield Defrosting and
Defogging" section in this chapter.

Rear Window Defroster

The defroster heats the window to
remove frost, fog and thin ice from the
interior and exterior of the rear window,
while engine is running.

• To activate the rear window defroster,

press the rear window defroster button
located in the center facia switch
panel. The indicator on the rear win-
dow defroster button illuminates when
the defroster is ON.

• To turn off the defroster, press the rear

window defroster button again.

Information 

• If there is heavy accumulation of snow

on the rear window, brush it off before
operating the rear defroster.

• The rear window defroster automatical-

ly turns off after approximately 20 min-
utes or when the ignition switch is in the
LOCK/OFF position.

Side view mirror defroster

If your vehicle is equipped with the side
view mirror defrosters, they will operate
at the same time you turn on the rear
window defroster.

i

NOTICE

OAD045323

OAD045324

■

Manual climate control system

■

Automatic climate control system

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments