3-102
Convenient features of your vehicle
Turn signals and lane change
signals
To signal a turn, push down on the lever
for a left turn or up for a right turn in posi-
tion (A).
If an indicator stays on and does not
flash or if it flashes abnormally, one of the
turn signal bulbs may be burned out and
will require replacement.
Onetouch turn signal function
To activate the One Touch Turn Signal
function, push the turn signal lever up or
down to position (B) and then release it.
The lane change signals will blink 3, 5 or
7 times.
(Continued)
•
When driving on a narrow curved
road or rough road.
•
When driving downhill or uphill.
•
When only part of the vehicle in
front is visible on a crossroad or
curved road.
•
When there is a traffic light,
reflecting sign, flashing sign or
mirror.
•
When the road conditions are
bad such as being wet or covered
with snow.
•
When the front vehicle's head-
lamps are off but the fog lamps
on.
•
When a vehicle suddenly appears
from a curve.
•
When the vehicle is tilted from a
flat tire or being towed.
•
When the LDWS (Lane Departure
Warning System) warning light
illuminates. (if equipped)
OLF044091N
•
Do not place any accessories,
stickers or tint on the windshield.
•
Have the windshield glass
replaced from an authorized deal-
er.
•
Do not remove or impact related
parts of the Smart High Beam
system.
•
Be careful that water doesn't get
into the Smart High Beam unit.
•
Do not place objects on the dash-
board that reflects light such as
mirrors, white paper, etc. The sys-
tem may malfunction if sunlight
is reflected.
•
At times, the Smart High Beam
system may not work properly,
always check the road conditions
for your safety. When the system
does not operate normally, manu-
ally change between the high
beam and low beam.
WARNING
Summary of Contents for Elantra 2018
Page 518: ...I Index I ...
