manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual

The Hyundai Elantra 2018 is an exceptional vehicle designed to provide optimum performance and comfort. To help you get started with this remarkable car, we offer a comprehensive user manual available for free download on our website. Discover every detail, feature, and function of the Elantra 2018 with our user-friendly manual, exclusively at manualshive.com.

Share
Download
background image

7-19

7

Maintenance

E

EN

NG

GIIN

NE

E  O

OIIL

L

Checking the Engine Oil Level 

1. Follow all of the oil manufacturer’s pre-

cautions.

2. Be sure the vehicle is on the level

ground in P (Park) with the parking
brake set. If possible, block the
wheels.

3. Turn the engine on and allow the

engine to reach normal operating tem-
perature.

4. Turn the engine off and wait about five

minutes for the oil to return to the oil
pan.

5. Pull the dipstick out, wipe it clean, and

re-insert it fully.

6. Pull the dipstick out again and check

the level. The level should be between
F and L.

7. If it is near or at L, add enough oil to

bring the level to F.

To prevent damage to your engine:
• Do not overfill with engine oil. Add

oil in small quantities and recheck
level to ensure engine is not over-
filled.

• Do not spill engine oil when adding

or changing engine oil. Use a funnel
to help prevent oil from being
spilled on engine components. Wipe
off spilled oil immediately.

NOTICE

OAD076121

OAD075062L

■

1.6 T-GDI

■

2.0 MPI

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Elantra 2018

Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
BURY CC 9040 Specification preview
CC 9040
Brand: BURY Pages: 2
Caltrend BM110 Installation Instructions preview
BM110
Brand: Caltrend Pages: 2
Advanced ICE 1296-1 Manual preview
1296-1
Brand: Advanced ICE Pages: 4
FALCON RIDGE Bobcat 3400 Instructions For Installation And Care preview
Bobcat 3400
Brand: FALCON RIDGE Pages: 4
Hummer HX-T Owner'S Manual preview
HX-T
Brand: Hummer Pages: 31
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
Mazda 2008 B2300 Truck Owner'S Manual preview
2008 B2300 Truck
Brand: Mazda Pages: 280
Lincoln NAUTILUS 2022 Owner'S Manual preview
NAUTILUS 2022
Brand: Lincoln Pages: 586
Jeep CHEROKEE 2017 User Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 374
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
Jaeger 21260514J Fitting Instructions Manual preview
21260514J
Brand: Jaeger Pages: 11
ATS 664-0030 Installation And Operating Manual preview
664-0030
Brand: ATS Pages: 12
XTC RZR-SW-USB-2B Manual preview
RZR-SW-USB-2B
Brand: XTC Pages: 2

Brands by name

Popular brands

Load more brands