manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 338 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 338

5-55

Dri
ving y

our v

ehicle

5

Emergency Braking
(3

rd

warning)

• This warning message appears on the

LCD display with a warning alarm.

• The AEB system limitedly controls the

brakes to preemptively mitigate impact
in a collision.
- The brake control is maximized just

before a collision.

Brake operation

• In an urgent situation, the braking sys-

tem enters into the ready status for
prompt reaction against the driver’s
depressing the brake pedal.

• The AEB provides additional braking

power for optimum braking perform-
ance, when the driver depresses the
brake pedal.

• The braking control is automatically

deactivated, when the driver sharply
depresses the accelerator  pedal, or
when the driver abruptly operates the
steering wheel.

• The AEB braking control is automati-

cally canceled, when risk factors dis-
appear.

OAD055041N

■

Supervision cluster (Type B)

The driver should always use
extreme caution while operating
the vehicle, whether or not there is
a warning message or alarm from
the AEB system.

CAUTION

The AEB system logic operates
within certain parameters, such as
the distance from the vehicle or
pedestrian ahead, the speed of the
vehicle ahead, and the driver's
vehicle speed. Certain conditions
such as inclement weather and
road conditions may affect the
operation of the AEB system.

WARNING  

The AEB braking control cannot
completely stop the vehicle nor
avoid all collisions. The driver
should hold the responsibility to
safely drive and control the vehicle.

WARNING  

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments