manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 117 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 117

3-40

Convenient features of your vehicle

Information 

The automatic reverse feature is only
active when the "Auto Up" feature is used
by fully pulling up the switch to the second
detent.

Do not install any accessories on the
windows. The automatic reverse fea-
ture may not operate.

Power window lock switch

The driver can disable the power window
switches on the passenger's doors by
pressing the power window lock switch.
When the power window lock switch is
pressed:
• The driver's master control can only

operate the driver's power window.

• The front passenger's control cannot

operate the front passenger's power
window.

• The rear passenger's control cannot

operate the rear passenger's power
window.

NOTICE

i

OAD045021N

Make sure body parts or other
objects are safely out of the way
before closing the windows to
avoid injuries or vehicle damage.
Objects less than 0.16 inch (4 mm)
in diameter caught between the
window glass and the upper win-
dow channel may not be detected
by the automatic reverse window
and the window will not stop and
reverse direction.

WARNING  

Small objects that can get caught
between the sunroof glass and the
front glass channel may not be
detected by the automatic reverse
system. In this case, the sunroof
glass will not detect the object and
reverse direction.

WARNING  

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments