manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 360 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 360

5-77

Dri
ving y

our v

ehicle

5

To decrease the Smart Cruise
Control set speed

Follow either of these procedures:
• Push the toggle switch down (SET-),

and hold it. Your vehicle set speed will
decrease by 5 mph (10 km/h). Release
the toggle switch at the speed you
want.

• Push the toggle switch down (SET-),

and release it immediately. The cruis-
ing speed will decrease by 1.0 mph
(1.0 km/h) each time you move the tog-
gle switch down in this manner.

• You can set the speed to 20 mph (30

km/h).

To temporarily accelerate with
the Smart Cruise Control on

If you want to speed up temporarily when
the Smart Cruise Control is on, depress
the accelerator pedal. Increased speed
will not interfere with Smart Cruise
Control operation or change the set
speed.
To return to the set speed, take your foot
off the accelerator.
If you push the toggle switch down (SET-)
at increased speed, the cruising speed
will be set again.

Smart Cruise Control will be
temporarily canceled when:

Canceled manually
• Depressing the brake pedal.
• Pressing the CANCEL button located

on the steering wheel.

The Smart Cruise Control turns off tem-
porarily when the indicator on the LCD
display turns off.
The CRUISE indicator is illuminated con-
tinuously.

OAD055020

Be careful when accelerating tem-
porarily, because the speed is not
controlled automatically at this
time even if there is a vehicle in
front of you.

CAUTION

OAD055022

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments