manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 258 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 258

4-39

Multimedia System

4

MENU : iPod

®

In iPod

®

mode, press the [MENU] button

to set the Repeat, Random, Information
and Search features.

Repeat : 

[1] 

Button

Repeat the current song.
Press RPT again to turn repeat off.

Random : 

[2] 

Button

Plays all songs within the currently play-
ing category in random order.
Press RDM again to turn off.

Information : 

[3] 

Button

Displays information for the current song.
Press the [MENU] button to turn off info
display.

Search : 

[4] 

Button

Displays iPod

®

category list.

While in iPod

®

category sublists, press

the [MENU] button to move up to the par-
ent category.

MENU : AUX

AUX is used to play external MEDIA cur-
rently connected with the AUX terminal.
AUX mode will automatically start when
an external device is connected with the
AUX terminal.
If an external device is connected, you
can also press the [MENU]  button to
change to AUX mode.
AUX mode cannot be started unless
there is an external device connected to
the AUX terminal.

Information 

- Using the AUX

Fully insert the AUX cable into the AUX
terminal for use.

i

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments