manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 232 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 232

(Continued)
• For fifth generation iPod

®

Nano devices,

the iPod

®

may not be recognized when

the battery level is low. Please charge
the iPod

®

for use. 

• Search/play orders shown within the

iPod

®

device may differ with the orders

shown within the audio system.

• If the iPod

®

malfunctions due to an iPod

®

device defect, reset the iPod

®

and try

again. (To learn more, refer to your iPod

®

manual)

• Some iPod

®

s may not sync with the

System depending on its version. If the
Media is removed before the Media is
recognized, then the system may not
properly restore the previously operated
mode. (iPad

®

charging is not support-

ed.)

Information 

- Using the AUX

device

• If an external device connector is con-

nected with the AUX terminal, then
AUX mode will automatically operate.
Once the connector is disconnected, the
previous mode will be restored. 

• AUX mode can be used only when an

external audio player (camcorder, in-car
DVD player, etc.) has been connected. 

• The AUX volume can be controlled sep-

arately from other audio modes.

• Connecting a connector jack to the AUX

terminal without an external device will
convert the system to AUX mode, but
only output noise. When an external
device is not being used, also remove the
connector jack.

• When the external device power is con-

nected to the power jack, playing the
external device may output noise. In
such cases, disconnect the power con-
nection before use.

• Fully insert the AUX cable to the AUX

jack upon use.

Information 

- Before using the

Bluetooth

®

handsfree

What is Bluetooth

®

?

• Bluetooth

®

refers to a short-distance

wireless networking technology which
uses a 2.4GHz ~ 2.48GHz frequency to
connect various devices within a certain
distance.

• Supported within PCs, external devices,

Bluetooth

®

phones, PDAs, various elec-

tronic devices, and automotive environ-
ments, Bluetooth

®

allows data to be trans-

mitted at high speeds without having to
use a connector cable.

• Bluetooth

®

Handsfree refers to a device

which allows the user to conveniently
make phone calls with Bluetooth

®

mobile phones through the audio system.

• Bluetooth

®

Handsfree may not be support-

ed in some mobile phones. To learn more
about mobile device compatibility, visit
www. hyundaiusa.com.

i

i

4-13

Multimedia System

4

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments