manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 326 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 326

5-43

Dri
ving y

our v

ehicle

5

The drive mode may be selected accord-
ing to the driver's preference or road con-
dition.
The system resets to be in the NORMAL
mode (except if it is in ECO mode), when
the engine is restarted.

Information 

If there is a problem with the instrument
cluster, the drive mode will be in NOR-
MAL mode and may not change to ECO
mode or SPORT mode. 

Automatic transmission:
The mode changes, as below, whenever
the DRIVE MODE button is pressed.

Dual clutch transmission:
ECO mode is not available with the dual
clutch transmission. The mode changes,
as below, whenever the DRIVE MODE
button is pressed.

When NORMAL mode is selected, it is
not displayed on the instrument cluster.

ECO mode (if equipped)

When the Drive Mode is set
to ECO mode, the engine and
transmission control logic are
changed to maximize fuel
efficiency.

• When the ECO mode is selected by

pressing the DRIVE MODE button, the
ECO indicator will illuminate.

• If the vehicle is set to ECO mode,

when the engine is turned OFF and
restarted the Drive Mode setting will
remain in ECO mode.

Information 

Fuel efficiency depends on the driver's
driving habit and road condition.

i

i

D

DR

RIIV

VE

E  M

MO

OD

DE

E  IIN

NT

TE

EG

GR

RA

AT

TE

ED

D  C

CO

ON

NT

TR

RO

OL

L  S

SY

YS

ST

TE

EM

M

NORMAL

SPORT                  ECO

OAD055016N

NORMAL             SPORT

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments