manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 57 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 57

2-40

Safety system of your vehicle

Where Are the Air Bags? 

Driver's and passenger's front
air bags 

Your vehicle is equipped with a
Advanced Supplemental Restraint
System (SRS) and lap/shoulder belts at
both the driver and passenger seating
positions.
The SRS consists of air bags which are
located in the center of the steering
wheel, in the driver's side lower crash
pad below the steering wheel column
and the passenger's side front panel pad
above the glove box.
The air bags are labeled with the letters
"AIR BAG" embossed on the pad covers.

The purpose of the SRS is to provide the
vehicle's driver and front passengers
with additional protection than that
offered by the seat belt system alone.
The SRS uses sensors to gather infor-
mation about the driver’s and front pas-
senger's seat belt usage and impact
severity.
The seat belt buckle sensors determine if
the driver and front passenger's seat
belts are fastened. These sensors pro-
vide the ability to control the SRS deploy-
ment based on whether or not the seat
belts are fastened, and how severe the
impact is.
The advanced SRS offers the ability to
control the air bag inflation within two lev-
els. A first stage level is provided for mod-
erate-severity impacts. A second stage
level is provided for more severe impacts.
According to the impact severity, and
seat belt usage, the SRS Control Module
(SRSCM) controls the air bag inflation.
Failure to properly wear seat belts can
increase the risk or severity of injury in
an accident.

OAD035034

OAD035035

OAD035039

■

Driver's knee air bag

■

Driver's front air bag

■

Passenger's front air bag

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments