manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 266 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 266

4-47

Multimedia System

4

Contact List Best Practices

• Use full names vs. short or single syl-

lable names (“John Smith” vs. “Dad”,
“Smith Residence” vs. “Home”)

• Avoid using special characters or

hyphens (@, &, #, /, -, *, +, etc.)

• Avoid using acronyms (“In Case of

Emergency” vs. “ICE”)

• Spell words completely, no abbrevia-

tions (“Doctor Goodman” vs. “Dr.
Goodman”)

Skipping Prompt Messages

While prompt message is being stated

Short press the 

button on the steer-

ing wheel controls
The prompt message is immediately
ended and the beep tone will sound.
After the “Beep”, say the voice com-
mand.

Re-starting Voice Recognition

While system waits for a command

Short press the 

button on the steer-

ing wheel controls
The command wait state is immediately
ended and the beep tone will sound.
After the “Beep”, say the voice com-
mand.

Ending Voice Recognition

While Voice Recognition is operating 

Press and hold the 

button on the

steering wheel controls.
• While using voice command, pressing

any steering wheel controls or a differ-
ent button will end voice command.

• When the system is waiting for a voice

command, say “cancel” or “end” to end
voice command.

• When the system is waiting for a voice

command, press and hold the 

but-

ton on the steering wheel to end voice
command.

Voice Recognition and Phone
Contact Tips  :

The Hyundai Voice Recognition System
may have difficulty understanding some
accents or uncommon names. When
using Voice Recognition to place a call,
speak in a moderate tone, with clear pro-
nunciation.
To maximize the use of Voice
Recognition, consider these guidelines
when storing contacts :
• Use full names vs. short or single syl-

lable names (“John Smith” vs. “Dad”,
“Smith Residence” vs. “Home”)

• Avoid using special characters or

hyphens (@, &, #, /, -, *, +, etc.)

• Avoid using acronyms (“In Case of

Emergency” vs. “ICE”)

• Spell words completely, no abbrevia-

tions (“Doctor Goodman” vs. “Dr.
Goodman”)

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments