manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 24 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 24

2-7

Saf

ety system of y

our v

ehicle

2

Power adjustment 
(for driver's seat, if equipped)

The front seat can be adjusted by using
the control switches located on the out-
side of the seat cushion. Before driving,
adjust the seat to the proper position so
that you can easily control the steering
wheel, foot pedals and controls on the
instrument panel.

To prevent damage to the seats:
• Always stop adjusting the seats

when the seat has been adjusted as
far forward or rearward as possible.

• Do not adjust the seats longer than

necessary when the engine is
turned off. This may result in unnec-
essary battery drain.

• Do not operate two or more seats at

the same time. This may result in an
electrical malfunction.

Forward and rearward adjustment

To move the seat forward or rearward:
1. Push the control switch forward  or

rearward.

2. Release the switch once the seat

reaches the desired position.

Seatback angle 

To adjust the seatback:
1. Rotate the top of control switch for-

ward or rearward.

2. Release the switch once the seatback

reaches the desired position.

NOTICE

NEVER allow children in the vehicle
unattended. The power seats are
operable when the engine is turned
off.

WARNING  

OAD035005

OAD035006

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments