manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 264 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 264

4-45

Multimedia System

4

Favorites

Press the [PHONE] button

Select

[Fav]
• Saved Favorite contact : Connects call

upon selection.

• To add Favorite : Downloaded contacts

can be saved as Favorite.

• To save Favorite, contacts should be

downloaded.

• Contact saved in Favorites will not be

automatically updated if the contact
has been updated in the phone. To
update Favorites, delete the Favorite
and create a new Favorite.

Call History

Press the [PHONE] button

Select

[History]
A list of incoming, outgoing and missed
calls is displayed.
• Call history may not be saved in the

call history list in some mobile phones.

• Calls received with hidden caller ID will

not be saved in the call history list.

• Calling through the call history is not

possible when there is no call history
stored or a 

Bluetooth

®

Wireless

Technology phone is not connected.

• Up to 50 received, dialed and missed

calls are stored in Call History.

• Time of received/dialed calls and call

time information are not stored in Call
History.

Contacts

Press the [PHONE] button

Select

[Contacts]
The list of saved phone book entries is
displayed.

NOTE:
Find a contact in alphabetical order,
press the [MENU] button.

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments