manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 241 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 241

4-22

Multimedia System

(7) [1] ~ [6] (Preset)
• Radio mode : Saves frequencies

(channels) or receives saved frequen-
cies (channels).

• CD, USB, iPod

®

, My Music* mode

- [RPT] : Repeat
- [RDM] : Random

In the Radio, Media, Setup, and Menu
pop up screen, the number menu is
selected.
* if equipped

(8) DISP
• Each short press toggles through the

following modes : Screen Off 

➟

Screen

On 

➟

Screen Off.

• Audio operation is maintained and only

the Screen will be turned Off.

• In the Screen Off state, press any but-

ton to turn the Screen On again.

(9) SCAN
• Radio mode

- Short press : Previews each broad-

cast for 5 seconds each.

- Press and hold : Previews the broad-

casts saved in Preset [1] ~ [6] for 5
seconds each.

- Press the [SCAN] button again to

continue listening to the current fre-
quency.

- XM Radio does not support the

Preset scan feature.

• CD, USB, My Music* mode

- Short press : Previews each song

(file) for 10 seconds each.

- Press the [SCAN] button again to

continue listening to the current song
(file).

* if equipped

(10) SETUP/CLOCK
• Moves to the Display, Sound, Clock,

Phone, System setting menu.

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments