manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 168 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 168

3-91

Con

v

enient f

eatur

es of y

our v

ehicle

3

Range

Range (1)

• The range is the estimated distance

the vehicle can be driven with the
remaining fuel in the fuel tank.
- Distance range:

1 ~ 9999 mi. or 1 ~ 9999 km

• If the estimated distance is below 

1 mi. (1 km), the trip computer will dis-
play "----" as the range.

Information

• If the vehicle is not on level ground or

the battery power has been interrupted,
the range function may not operate cor-
rectly.

• The range may differ from the actual

driving distance as it is an estimate of
the available driving distance.

• The trip computer may not register

additional fuel if less than 1 gallon  (3
liters) of fuel are added to the vehicle.

• The fuel economy and range may vary

significantly based on driving condi-
tions, driving habits, and condition of
the vehicle.

Average Fuel Economy (2)

• The average fuel economy is calculat-

ed by the total driving distance and fuel
consumption since the last average
fuel economy reset.
- Fuel economy range:

0.0 ~ 99.9 MPG or L/100km or km/L

• To clear the average fuel economy

manually, press the RESET button on
the steering wheel for more than 1 sec-
ond when the average fuel economy is
displayed.

Instant Fuel Economy (3)

This mode displays the instantaneous
fuel economy while driving when the
vehicle speed is greater than 6.2 mph [10
kph].
- Fuel economy range:

0 ~ 50 MPG or 0 ~ 30 L/100km

i

OAD045151N

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments