manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 231 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 231

(Continued)
• Avoid use of USB memory

products that can also be
used as key chains or
mobile phone accessories.
Use of such products may
cause damage to the USB jack.

• Connecting an MP3 device or phone

through various channels, such as
AUX/BT or Audio/ USB mode may
result in pop noises or abnormal opera-
tion.

Information 

- Using the iPod

®

device

• iPod

®

is a registered trademark of

Apple Inc.

• In order to use the iPod

®

while operat-

ing the keys, you must use a dedicated
iPod

®

cable. (the cable that is supplied

when purchasing iPod

® 

/iPhone

®

prod-

ucts)

• If the iPod

®

is connected to the vehicle

while it is playing, a high pitch sound
could occur for approximately 1-2 sec-
onds immediately after connecting. If
possible, connect the iPod to the vehicle
with the iPod

®

stopped/ paused.

• During ACC ON state, connecting the

iPod

®

through the iPod

®

cable will

charge the iPod

®

through the car audio

system.

• When connecting with the iPod

®

cable,

make sure to fully insert the jack to pre-
vent communication interference.

• When the EQ features of an external

device, such as the iPod

®

, and the audio

system are both active, EQ effects could
overlap and cause sound deterioration
and distortion. 

(Continued)

(Continued)

Whenever possible, turn off the EQ fea-
ture within the external device upon use
by connecting with the audio system.

• Noise may occur when an iPod

®

or AUX

device is connected. When such devices
are not being used, disconnect the device
for storage.

• When the iPod

®

or AUX device power is

connected to the power jack, playing the
external device may result in noise. In
such cases, disconnect the power con-
nection before use.

• Skipping or improper operation may

occur depending on the characteristics
of your iPod

® 

/Phone

®

device.

• If your iPhone

®

is connected to both the

Bluetooth

®

Wireless Technology and

USB, the sound may not be properly
played. In your iPhone

®

, select the Dock

connector

or

Bluetooth

®

Wireless

Technology to change the sound output
(source).

• iPod mode cannot be operated when the

iPod

®

cannot be recognized due to ver-

sions that do not support communica-
tion protocols. 

(Continued)

i

4-12

Multimedia System

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments