manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 348 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 348

5-65

Dri
ving y

our v

ehicle

5

If all the conditions to activate LKAS is
not satisfied, the system will convert to
LDWS (Lane Departure Warning
System) and warn the driver only when
the driver crosses the lane lines.

If the driver takes their hands off the
steering wheel for several seconds while
the LKAS is activated, the system will
warn the driver with a visual and audible
warning.

If the driver still does not have their
hands on the steering wheel after sever-
al seconds, the system will not control
the steering wheel and warn the driver
only when the driver crosses the lane
lines.

Information

• Even though the steering is assisted by

the system, the driver can still steer to
control the steering wheel. 

• The steering wheel may feel heavier

when the steering wheel is assisted by
the system than when it is not. 

i

■

Left lane line

■

Right lane line

OAD055053N/OAD055051N

OAD055105N

The warning message may appear
late according to road conditions.
Therefore, always have your hands
on the steering wheel while driving.

WARNING  

•

The driver is responsible for
accurate steering.

•

Turn off the system in below situ-
ations.
- In bad weather
- In bad road condition
- When the steering wheel needs

to be controlled by the driver
frequently.

WARNING  

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments