manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 491 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 491

7-73

7

Maintenance

3. Disconnect the connector and then

remove the nuts by turning the nuts
counter clockwise.

4. Take the light assembly out.

5. Remove the socket from the assembly

by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.

6. Remove the bulb by pulling it out.
7. Insert a new bulb by inserting it into

the socket.

8. Install the light assembly to the trunk.
9. Reinstall the nuts and connector and

then the trunk lid cover by pushing in
the screw.

Stop/Tail light (Type B/Type C)

If the LED light does not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.

OAD075052

OAD075056

OAD075069N

OAD075070N

■

Type A - Bulb type

■

Type B, C - LED type

Back up

Tail

Back up

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments