manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual

The Hyundai Elantra 2018 is an exceptional vehicle designed to provide optimum performance and comfort. To help you get started with this remarkable car, we offer a comprehensive user manual available for free download on our website. Discover every detail, feature, and function of the Elantra 2018 with our user-friendly manual, exclusively at manualshive.com.

Share
Download
background image

7-72

Maintenance

Stop/Tail light and turn signal light

5. Remove the socket from the assembly

by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.

6. Remove the bulb from the socket by

pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.

7. Insert a new bulb by inserting it into

the socket and rotating it until it locks
into place.

8. Install the socket in the assembly by

aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.

Stop/Tail light (Type B/Type C)

If the LED light does not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.

Side marker (Type A/Type B)

5. Remove the socket from the assembly

by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.

6. Remove the bulb by pulling it out.
7. Inset a new bulb by insetring it into the

socket.

8. Install the socket in the assembly by

aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.

Side marker (Type C)

If the LED light does not operate, have
the vehicle checked by an authorized
HYUNDAI dealer.

Inside lamp

Tail light/Back-up light

1. Open the trunk.
2. Loosen the retaining screw of the

trunk lid cover and then remove the
cover.

OAD075055

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Elantra 2018

Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
iArmor IA-N179 Manual preview
IA-N179
Brand: iArmor Pages: 6
Axxess AX-LR904 Installation Instructions Manual preview
AX-LR904
Brand: Axxess Pages: 8
SeaSucker SX6150 Quick Start Manual preview
SX6150
Brand: SeaSucker Pages: 9
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
RAM Promaster 2016 User Manual preview
Promaster 2016
Brand: RAM Pages: 148
Hamron 619-626 User Instructions preview
619-626
Brand: Hamron Pages: 36
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37
Whispbar K482W Fitting Instructions Manual preview
K482W
Brand: Whispbar Pages: 14
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
AUTOTECH 10.297.300K-303K Installation Instructions preview
10.297.300K-303K
Brand: AUTOTECH Pages: 1
Gator ARV50T User Manual preview
ARV50T
Brand: Gator Pages: 18
Pet Gear PG9050TN Instruction Manual preview
PG9050TN
Brand: Pet Gear Pages: 4

Brands by name

Popular brands

Load more brands