manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 2 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 2

F2

Your HYUNDAI should not be modified in any way. Such
modifications may adversely affect the performance,
safety or durability of your HYUNDAI and may, in addi-
tion, violate conditions of the limited warranties covering
the vehicle. Certain modifications may also be in viola-
tion of regulations established by the U.S. Department
of Transportation and other federal or state agencies.

Your vehicle is equipped with electronic fuel injection
and other electronic components. It is possible for an
improperly installed/adjusted two-way radio or cellular
telephone to adversely affect electronic systems. For
this reason, we recommend that you carefully follow the
radio manufacturer’s instructions or consult your
HYUNDAI dealer for precautionary measures or special
instructions if you choose to install one of these devices.

CAUTION: MODIFICATIONS TO

YOUR HYUNDAI

TWO-WAY RADIO OR CELLULAR

TELEPHONE INSTALLATION

This manual includes information titled as DANGER,
WARNING, CAUTION and NOTICE.
These titles indicate the following:

SAFETY AND VEHICLE DAMAGE

WARNING

DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious
injury.

DANGER

WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious
injury.

CAUTION indicates a hazardous situation which,
if not avoided, could result in minor or moderate
injury.

CAUTION

NOTICE indicates a situation which, if not avoided,
could result in vehicle damage.

NOTICE

WARNING

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments