manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 495 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 495

7-77

7

Maintenance

• Water washing in the engine com-

partment including high pressure
water washing may cause the failure
of electrical circuits located in the
engine compartment.

• Never allow water or other liquids to

come in contact with electrical/elec-
tronic components inside the vehi-
cle as this may damage them.

Waxing

A good coat of wax provides a barrier
between your paint and environmental
contamination.
Keeping a good coat of wax on your vehi-
cle will help protect it.
Wax the vehicle when water will no
longer bead on the paint.
Always wash and dry the vehicle before
waxing. Use a good quality liquid or
paste wax, and follow the manufacturer’s
instructions. Wax all metal trim to protect
it and to maintain its luster.
Removing oil, tar, and similar materials
with a spot remover will usually strip the
wax from the finish. Be sure to re-wax
these areas even if the rest of the vehicle
does not yet need waxing.

• Wiping dust or dirt off the body with

a dry cloth will scratch the finish.

• Do not use steel wool, abrasive

cleaners, or strong detergents con-
taining highly alkaline or caustic
agents on chrome-plated or
anodized aluminum parts. This may
result in damage to the protective
coating and cause discoloration or
paint deterioration.

Repairing your vehicle’s finish

Deep scratches or stone chips in the
painted surface must be repaired
promptly. Exposed metal will quickly rust
and may develop into a major repair
expense.

If your vehicle is damaged and
requires any metal repair or replace-
ment, be sure the body shop applies
anti-corrosion materials to the parts
repaired or replaced.

NOTICE

NOTICE

NOTICE

OLMB073082

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments