manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual

The Hyundai Elantra 2018 is an exceptional vehicle designed to provide optimum performance and comfort. To help you get started with this remarkable car, we offer a comprehensive user manual available for free download on our website. Discover every detail, feature, and function of the Elantra 2018 with our user-friendly manual, exclusively at manualshive.com.

Share
Download
background image

6-37

W

hat to do in an emer

g

ency

6

• Use a towing cable or chain less than

16 feet (5 m) long. Attach a white or red
cloth (about 12 inch (30 cm) wide) in
the middle of the cable or chain for
easy visibility.

• Drive carefully so the towing cable or

chain remains tight during towing.

• Before towing, check the automatic

transaxle/dual clutch transmission for
fluid leaks under your vehicle. If the
automatic transaxle/dual clutch trans-
mission fluid is leaking, flatbed equip-
ment or a towing dolly must be used.

Tie-down hook

ODH063025

To avoid damage to your vehicle
and vehicle components when tow-
ing:

•

Always pull straight ahead when
using the towing hooks. Do not
pull from the side or at a vertical
angle.

•

Do not use the towing hooks to
pull a vehicle out of mud, sand or
other conditions from which the
vehicle cannot be driven out under
its own power.

•

Limit the vehicle speed to 
10 mph (15 km/h) and drive less
than 1 mile (1.5 km) when towing
to avoid serious damage to the
automatic transaxle/dual clutch
transmission.

CAUTION

OLMB033091

Do not use the tie-down hook(s) for
towing purposes. If the tie-down
hook(s) are used for towing, the tie-
down hook(s) or bumper will be
damaged and this could lead to
serious injury.

WARNING  

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Elantra 2018

AC Schnitzer DKG Fitting Instructions Manual preview
DKG
Brand: AC Schnitzer Pages: 16
Honda 08A06-361-210 Installation Instructions preview
08A06-361-210
Brand: Honda Pages: 4
Pro-gard SAFESTOP SS0005 Installation Manual preview
SAFESTOP SS0005
Brand: Pro-gard Pages: 4
Safe Fleet PRIME DESIGN VBI-FT21B Manual preview
PRIME DESIGN VBI-FT21B
Brand: Safe Fleet Pages: 12
Honda Plusone Console 4521011B User Information preview
Plusone Console 4521011B
Brand: Honda Pages: 4
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
Calix group TYP MVP 823 Assembly Instructions preview
TYP MVP 823
Brand: Calix group Pages: 4
Acura TSX 2014 Advanced Technology Manual preview
TSX 2014
Brand: Acura Pages: 19
Ford 2009 Edge Owner'S Manual preview
2009 Edge
Brand: Ford Pages: 325
MMD 41240 Quick Manual preview
41240
Brand: MMD Pages: 3
Altius ATHUDW-SCA User Manual preview
ATHUDW-SCA
Brand: Altius Pages: 16
Ford FLEX 2019 Quick Reference Manual preview
FLEX 2019
Brand: Ford Pages: 10
Fiat Panda 2015 Owner'S Handbook Manual preview
Panda 2015
Brand: Fiat Pages: 204
Chevrolet CORVETTE 427 Release Note preview
CORVETTE 427
Brand: Chevrolet Pages: 6
Metra Electronics 99-7400 Installation Instructions Manual preview
99-7400
Brand: Metra Electronics Pages: 8
Roadmaster 2120 Installation And Use preview
2120
Brand: Roadmaster Pages: 2

Brands by name

Popular brands

Load more brands