Hyundai Elantra 2018 Owner'S Manual Download Page 350

Page: 350 / 526

5-67

Dri
ving y

our v

ehicle

LKAS Malfunction

If there is a problem with the system a
message will appear for a few seconds. If
the problem continues the LKAS failure
indicator will illuminate.

LKAS failure indicator

The LKAS failure indicator (yellow) will
illuminate if the LKAS is not working
properly. Have your vehicle checked by
an authorized HYUNDAI dealer.

When there is a problem with the
system do one of the following:

• Turn the system on after turning the

engine off and on again.

• Check if the ignition switch is in the ON

position.

• Check if the system is affected by the

weather. (ex: fog, heavy rain, etc.)

• Check if there is foreign matter on the

camera lens.

If the problem is not solved, have your
vehicle checked by an authorized
HYUNDAI dealer.

OAD055107N

OAD055025

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Elantra 2018

Reviews:

Hyundai Elantra 2018, Owner'S Manual, Page: 350 / 526

Search results

Summary of Contents for Elantra 2018

Reviews: