manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 91 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 91

3-14

Convenient features of your vehicle

Auto Door Lock/
Unlock Features

Impact sensing door unlock

All doors will be automatically unlocked
when an impact causes the air bags to
deploy.

Speed sensing door lock

All doors will be automatically locked
when vehicle speed exceeds 9 mph (15
km/h).
All of the doors will be automatically
unlocked after the engine is turned off.

Shift lever auto door lock

All doors will be automatically locked
when shifting the shift lever out of P
(Park) with the engine running.

You can activate or deactivate the Auto
Door Lock/Unlock features from the User
Settings Mode on the LCD display.

For more information, refer to the
"LCD Display" section in this chapter.

Always secure your vehicle.
Leaving your vehicle unlocked
increases the potential risk to you
or others from someone hiding in
your vehicle.
To secure your vehicle, while
depressing the brake, move the
shift lever to the P (Park) position,
engage the parking brake, and
place the ignition switch in the
LOCK/OFF position, close all win-
dows, lock all doors, and always
take the key with you.

WARNING

Opening a door when something is
approaching may cause damage or
injury. Be careful when opening
doors and watch for vehicles,
motorcycles, bicycles or pedestri-
ans approaching the vehicle in the
path of the door.

CAUTION

If you stay in the vehicle for a long
time while the weather is very hot
or cold, there are risks of injuries or
danger to life. Do not lock the vehi-
cle from the outside when someone
is in the vehicle.

WARNING

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments