manualshive.com logo in svg

Hyundai Elantra 2018, Owner'S Manual, Page: 143 / 526

Share
Download
Hyundai Elantra 2018 Owner'S Manual Download Page 143

3-66

Convenient features of your vehicle

This warning light remains ON
after blinking for approximately 60
seconds, or repeatedly blinks ON
and OFF in 3 second intervals:

When there is a malfunction with the
TPMS.
In this case, have your vehicle inspected
by an authorized HYUNDAI dealer.

For more information, refer to "Tire
Pressure Monitoring System (TPMS)"
in chapter 6.

Automatic Emergency
Braking (AEB) Warning
light 
(if equipped)

This warning light illuminates :

• When the AEB system is turned off.
• When the radar sensor or cover is

blocked with dirt or snow. Check the
sensor and cover and clean them by
using a soft cloth.

• When there is a malfunction with AEB.

In this case, have your vehicle inspect-
ed by an authorized HYUNDAI dealer.

Headlight Warning
Light

This warning light illuminates:

This warning light illuminates if one of the
exterior bulbs (headlamp, taillamp,
foglamp, etc.) is not operating properly.
One of the bulbs may need to be
replaced. If the vehicle is equipped with
LED headlamps, have the vehicle
inspected by an authorized HYUNDAI
dealer.

Information 

When replacing the bulb, use the same
wattage bulb. 
For more information, refer to "BULB
WATTAGE" in chapter 8.

i

Safe Stopping

•

The TPMS cannot alert you to
severe and sudden tire damage
caused by external factors.

•

If you notice any vehicle instabili-
ty, immediately take your foot off
the accelerator pedal, apply the
brakes gradually with light force,
and slowly move to a safe posi-
tion off the road.

WARNING

Summary of Contents for Elantra 2018















































































































































































































































































































































































































































































































































Reviews:

No comments