7 HANDLEBAR,CONTROLS
7.1
Handlebar �osition
102144-10
The holes on the handlebar support are placed at a distance
of
6)
from the center.
I
Hole distance A
I
3.5 mm (0.138 in)
The handlebar can be mounted in 2 different positions. In this
way, the handlebar can be mounted in the most comfortable
position for the rider.
7.2
Ad"usting the handlebar �osition
42
e--e
0------�
e------e
<U>
0
102145-10
Preparatory work
-
Remove the handlebar cushion.
Main work
-
Remove screws
0-
Take off the handlebar clamps. Remove
the handlebar and lay it to one side.
Info
Cover the components to protect them against dam
age.
Do not kink the cables and lines.
-
Remove screws fj. Remove handlebar support@).
-
Position rubber bushings
8
and push through nuts
@)
from
below.
-
Place the handlebar support in the required position. Mount
and tighten screws
8.
Guideline
Screw, handle-
M10
bar support
40 Nm (29.5 lbf ft)
Loctite
®
243
™
-
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor
rectly.
-
Position the handlebar clamps. Mount screws
O.
Screw the
handlebar clamps so that both parts touch at the front and
tighten all of the screws equally.
Guideline
Screw, handlebar
clamp
Finishing work
MB
-
Mount the handlebar cushion.
20 Nm (14.8 lbf ft)
..
