17.5.23 Installing the camshafts
8
I
17 ENGINE
-
Pull up the timing chain and insert the intake camshaft
0-
-
Place the timing chain over the camshaft gear of intake
camshaft.
✓ Marking
tl
is positioned and is aligned with the edge of
the cylinder head.
Ensure that bleeder
8
is correctly positioned.
-
Slip in exhaust camshaft
8.
-
Place the timing chain over the camshaft gear and position
the camshaft in the bearing seat.
✓ Marking
tl
is positioned and is aligned with the edge of
the cylinder head.
-
Clean all oil nozzles thoroughly and blow out with
compressed air.
-
Mount the camshaft bearing bridge.
•
Info
I
Ensure that the dowel pins are seated properly.
-
Position guide rail
C,.
-
Mount screws
0
and tighten from the inside to the outside.
Guideline
Screw,
M7x1
14 Nm (10.3 lbf ft)
camshaft
Lubricated with engine
bearing bridge
oil
17.5.24 Installing the timing chain tensioner
-
Position timing chain tensioner
O
and insert it with new 0-
ring
8.
227
