MAN0923_Issue 3_04/15
Touchpoint Pro
Operating Instructions
160
12. Ordering Information
12.2 Touchpoint Pro Control System Part Number Generator
Touchpoint Pro Control System Part Number Generator
TPPR-S
19” Rack controller or Remote Unit
RL
19’’ Rack 5U Controller includes HMI, PCBs, SD card
RR
19’’ Rack 5U Remote Unit without HMI, PCBs, SD card
Redundant Control Centre Board (Select if a dual redundant system is required)
X
None
R
Yes (for TPPR-S-RL selection only)
Bus Interface Board
X
None
M
Modbus
®
Interface Board (for TPPR-S-RL selection only)
5, 7 or 9 Way Communication/Power Rail (Select the appropriate option for your PSU and I/O module combination)
Consists of a DIN Rail blank panel, 1 Ring Coupling Module and 5, 7 or 9 Backplanes
2
5 Way Communication/Power Rail; select up to maximum 5 I/O Modules
3
7 Way Communication/Power Rail; select up to maximum 7 I/O Modules
4
9 Way Communication/Power Rail; select up to maximum 9 I/O Modules
Power Configuration (Select the Power Supply options and I/O configuration needed)
X
None; select up to maximum 9 I/O Modules in any combination
A
5A; select up to maximum 7 I/O Modules in any combination
B
10A; select up to maximum 7 I/O Modules in any combination
C
20A; select up to maximum 5 I/O Modules in any combination
U
5A + UPS; select up to maximum 5 I/O Modules in any combination
V
10A + UPS; select up to maximum 5 I/O Modules in any combination
Input and Output Module (I/O module)
The maximum numbers of I/O Modules depend on Communication/Power Rail and Power Configuration
selection. Please include a code for each I/O module, including X=NONE, to make a total of 9 codes. The rail will be
populated in the order given below:
X
None
A
Analogue Input Module mV-Bridge
C
Analogue Input Module 4-20mA
H
Digital Input Module
N
Relay Output Module
Customer Logo (for Wall Mount
9U Cabinets only)
H
Honeywell
X
None
Customer Set up
D
Default
S
Custom
TPPR-S
RL
R
M
3
A
C
C
C
C
N
N
N
X
X
H
D