Honeywell touchpoint Pro, Operating Instructions Manual

Page: 2 / 241

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
2
Contents
Section Page
1 Safety and Information 8
1.1 How to use this manual 11
1.2 Safety Hazards 12
1.3 Location and Description of Warning Labels 14
1.3.1 Safety Warning Labels 14
1.3.2 Equipment Rating Labels (Hazardous Locations) 15
1.4 Disposal 16
1.4.1 Touchpoint Pro System 16
1.4.2 Packaging 15
1.4.3 Batteries 17
1.5 Restriction of Hazardous Substances (RoHS) Directive 17
1.6 Waste Electrical and Electronic Equipment (WEEE) Directive 17
1.7 Information 18
2 Overview / Introduction 19
2.1 Touchpoint Pro 19
2.2 Touchpoint Pro Controller 20
2.3 Remote Touchpoint Pro unit 20
2.4 System Topology 21
2.5 Communication/Power Rail and Ring Network 21
2.6 Input/Output (I/O) modules 22
2.6.1 Available Modules 23
2.7 System Interaction 23
2.8 Sensor Catalogue 24
2.9 Power Supply Options 25
2.9.1 Touchpoint Pro Power Supplies 25
2.9.2 Touchpoint Pro Power Redundancy Module 25
2.9.3 Touchpoint Pro UPS Module with Backup Battery 26
3 Mechanical Installation 27
3.1 Siting considerations 27
3.2 Wall Mounted Enclosures 27
3.2.1 Small Wall Mounted Enclosure – Mild Steel 29
3.2.2 Medium Wall Mounted Enclosure – Mild Steel 29
3.2.3 Large Wall Mounted Enclosure – Mild Steel 30
3.3 Hazardous Area Enclosure 31
3.4 Floor Standing Enclosures 32
3.4.1 Floor Standing Cabinet - Front Access 33
3.4.2 Floor Standing Cabinet - Rear Access 35
3.5 19” Rack mounted unit 37
3.6 Panel Mount Controller 37
3.7 Touchpoint Pro Battery Box 39
3.7.1 Siting considerations 39
3.7.2 Installation and Assembly 39
3.7.2.1 Mounting the Touchpoint Pro Battery Box to a wall 39
3.7.3 Touchpoint Pro Battery Box Assembly 41
3.8 Cooling and Ventilation 43
4 Electrical Installation 44
4.1 Power Consumption 44
4.2 Power Supply 44
4.2.1 AC Power Input 44
4.2.2 DC Power Input 45
4.2.3 DC Power Output 45