MAN0923_Issue 3_04/15
Touchpoint Pro
Operating Instructions
100
7. Normal Operation
7.4 Alarms
WARNING
High ‘off-scale’ readings may indicate an explosive concentration.
AVERTISSEMENT
Des résultats dépassant considérablement l’échelle peuvent être indicateurs d’une
concentration explosive.
7.4.1 View active alarms
Active alarms can be viewed in three ways:
1. From the
System Status
screen, select the flashing red bell
Alarm
icon
2. From the
System Status
screen navigation bar, select the
Active Events
icon, then the
Filter
icon and
select
Alarm
from the popup menu
Figure 7.10 Active Events Screen with filter options
3. From the
System Status
screen navigation bar, select the
Inputs
icon, then the
Filter
icon and select
Alarm
from the popup menu
The screen will display a list of all input channels with active Alarms, starting with the most recent event.
Unacknowledged alarms will flash, acknowledged ones will be solid
Note: the display will show the channel ID, location tag and the time of the alarm. If more than one alarm
level has been triggered on the same channel, all alarm levels will be shown.
